Making Simple Marionettes by John Roberts

Author:John Roberts
Language: eng
Format: epub
ISBN: 9781785005183
Publisher: Crowood

Step 2.

2. Mark one bar as the leg-bar. Mark the other as the head-body bar. At the centre point of the leg-bar, mark the thickness of the head-body bar, so they can be notched to fit together. Make sure the saw cuts on the ends of the leg and head-body bars are all vertical. Saw a small section out of the leg-bar 4mm deep.

Step 3.

3. Sandpaper the control to smooth off sharp edges. Slot the leg-bar on top of the head/body bar at 7cm from an end. This end will be the head end. Glue the two bars together with UHU, and bind with thread in a figure 8. Make sure the bars are at right angles to each other and all the end-slots are vertical.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.