Workshop Mastery with Jimmy DiResta by John Baichtal and Jimmy DiResta

Author:John Baichtal and Jimmy DiResta
Language: eng
Format: epub
Publisher: O'Reilly Media, Inc.
Published: 2016-10-15T00:00:00+00:00

Figure 4-32. Shaping the bevel to bring the metal to an edge

6. Drill the peg holes

Next, I cut the holes in the handle that I’ll use to attach the wood to the metal. I had a really hard time drilling the spring steel, since I didn’t have the right kind of bit in-house. I eventually resorted to step drill bits, and that did the trick.

7. Mill the pegs

Then I made the brass pegs that will keep the handle on. I put a piece of brass stock on the lathe and milled it down to fit the holes in the handle. I didn’t worry about getting the width perfect, because I knew they would be peened over.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.