Wood Magazine 76 by Larry Clayton

Wood Magazine 76 by Larry Clayton

Author:Larry Clayton
Language: eng
Format: epub
Tags: Wood, Home and hobby woodworker
Publisher: Meredith Corporation
Published: 1995-03-25T05:00:00+00:00


WOOD MAGAZINE JANUARY 1995

FULL-SIZED PATTERNS

GIVE YOU THE INSIDE TRACK

DRILLING THE AXLE HOLES

5 Fit your table-mounted router with a W round-over bit, and rout along the edges except the area where the driver sits as noted on the Exploded View drawing. Be careful not to let the router-bit pilot fall into the axle holes when routing the edges. To complete the aerodynamic look, sand round-overs along the edges not accessible with the router. Finish-sand the car body; it's easier to do it now than after you glue the axles and exhaust pipes in place.

Add the axles, wheels, and exhaust pipes

1 From Vi" dowel stock, cut the front and rear axles to length.

2 Using the three-step drawing at left for reference, drill a Viz" hole ¥i" deep centered into the ends of each axle.

3 Center and glue the axles in the body. The longer axle is for the rear wheels.

Immediately wipe off excess glue with a damp cloth.

4 Cut the exhaust pipes to length from !4" dowel stock, and glue them in place.

5 Remove the tires from the wooden hubs. Finish-sand each car body, and apply a clear finish to the bodies and wooden hubs.

6 Press the tires back onto the hubs. Slide the axle pegs through the wheels, and glue the pegs into the holes in the axles. You're ready to roll.

Buying Guide Wheels and driver. Enough lVi" and 2" wheels and drivers for two cars. Toy axle pegs included. Special skid-free rubber won't mark tile or wooden floors. Kit no. 18580, $9.95 ppd. The Woodworkers' Store, 21801 Industrial Blvd., Rogers, MN 55374-9514, or call 1-800-279-4441 to order.*

WOOD MAGAZINE JANUARY 1995



Download



Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.