Wood Magazine 25 by Larry Clayton

Author:Larry Clayton
Language: eng
Format: epub
Tags: Wood, Home and hobby woodworker
Publisher: Meredith Corporation
Published: 1988-03-25T05:00:00+00:00

Slight round-over %x 1 W'-diameter wood knob

1 Vi" holes

1 Vi" hole W deep for film canister

R = 5"

ymm

We used a circle cutter for cutting the larger-diameter holes.

slide the disk back onto the glued area, turn it upside down, and run a small bead of glue around the dowel below the top disk. Later, after the top disk is firmly glued in place, glue the dowel into the Vi" hole in the base disk, aligning the holes in the disks.

3 Mark a tW circle on a piece of W stock for the knob. Bore a W hole V2" deep at the center point. Cut the knob to shape on a band saw, sand smooth, and glue it to the top end of the dowel. Apply a clear finish to all the parts.4(&

Project Design: Jim Boclling Photographs: Bob Calmer Illustrations: Kim Downing; Bill Zaun

68

WOOD MAC.A7.INi: OCTOBER 1988

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.