Wood Magazine 4 by Larry Clayton

Author:Larry Clayton
Language: eng
Format: epub
Tags: Wood, Home and hobby woodworker
Publisher: Meredith Corporation
Published: 1985-03-25T05:00:00+00:00

8 Trim the stiles (D) to their finished length, then glue and clamp them to the front edge of each end panel, being sure to keep them at a 90° angle to each other.

9 Glue and clamp together the shelves (E, F) and the cabinet bottom (G). After the glue has dried, remove the clamps and excess glue. Trim the panels to finished length, and sand all the panels smooth. Cut a V'X2r notch in the front of E to accept the stiles (D).

Making the Drawer Divider and Guides

1 Cut the drawer divider rails {]) to size. To fashion the drawer divider stiles (K), rip a 12" maple board to 4V. Then, cut a %" groove ! /i" deep along both ends of the board as shown in the photo at right. Now, rip the two stiles to I'/z". Cut a like-sized groove along each end ol both rails. When cutting an end-grain groove, it is important to first

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.