Wood Magazine 111 by Larry Clayton

Author:Larry Clayton
Language: eng
Format: epub
Tags: Wood, Home and hobby woodworker
Publisher: Meredith Corporation
Published: 1999-03-25T05:00:00+00:00

Dry-clamp each drawer together first to check the fit. Then, glue and clamp the parts, adding one side piece last.

the bottom in place, and glue the other side in place as shown in Photo C. Clamp the assembly together, taking opposing diagonal measurements from the corners to check for square.

9 After marking the locations, drill the holes in the drawer fronts to accept the hardware. Be careful to locate the holes consistently from one front to another.

10 To create the look of an equal reveal on the top and bottom of each drawer when it's slid in place in the dresser, rout the bottom of each drawer front with a 15° chamfer bit (we used a CMT 857.503.11). You also could sand or plane the 15° chamfer along the bottom edge of each drawer front. See the Drawer drawing for reference. The key is to keep the chamfered edge straight.

11 Cut the drawer stops (AA) to size, and drill a countersunk mounting hole in each.

Now finish your showpiece dresser

1 Measure the opening, and rip and crosscut the back (BB) to size from 'A" plywood.

2 Finish-sand the carcase, drawers, and top. Finish the cabinet as desired. See the country-finishing article on page 72 of the December 1998 issue of WOOD magazine for our country finish. Or stain the cabinet and drawer fronts and protect them with a clear finish for the look of the dresser on page 64.

3 Attach the self-adhesive, self-lubricating nylon tape (see the Buying Guide for our source) where shown on the Exploded View drawing.

4 Slide the drawers into their respective openings, and screw the stops in place.

5 Mark the screw locations, drill the countersunk holes, and screw the back (BB) in place.*

Written by Marten Kcmmet

Project Design: Jeff Hayes

Illustrations: Roxanne LeMolne; Loma Johnson

Photographs: Helherington Photography

- It!

-Jb

I 82

WOODLINE Bits & Cutters feature:

• Tough European Carbide

• Euro Anti-Kickback Design

• Super-slick Non-stick finish.

OODLINE ARIZONA, Inc

P.O. Box 1530 • Payson, AZ 85547

T Great Router Bits & Shaffer Cutters!

"Why pay more or accept less!"

Roundover Bits with Bearing 1/4'Shank Radius

WL-1040 1/16" *9.

WL-1041 1/B" »9.

WL-1042 3/16" »9.

WL-1043 1/4" "9.

WL-1044 5/16" '10.

WL-1045 3/8" '11.

WL-1046 1/2" «13. 1/2" Shank

WL-1049 1/8" *9.

WL-1042-5 3/16" »9.

WL-1050 1/4' «9.

WL-1044-5 5/16" «10.

WU-1051 3/8" '12.

WL-1052 1/2" »13.

WL-1053 5/8" '16.

WL-1054 3/4" '18.

WL-1055 7/8" '25.

WL-1056 1" «27.

WL-1057 1-1/8" «30.

WL-1058 1-1/4" »30.

Cove Bits (continued) 1/2" Shank WL-1169 1/8"

WL-1170 WL-1171 WL-1172 WL-1173 WL-1174

1/4" 3/8" 1/2" 5/8" 3/4"

'10. '11. •13. '14. '18. •20.

Classical Ogee Bits

1/4" Shank- Radius Wl-1250 5/32" «18. WL-1251 1/4" *20. 1/2" Shank

WL-1252 5/32" «18. WL-1253 1/4" '20.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.