Home > Engineering & Transportation > Engineering

Electronic enclosures for 3d printing: Tutorials, tricks and tools to make your own electronic enclosures with Fusion 360 for 3d printing by Rodrigo S. A

Author:Rodrigo S. A. [S. A., Rodrigo] , Date: September 11, 2021 ,Views: 184

Electronic enclosures for 3d printing: Tutorials, tricks and tools to make your own electronic enclosures with Fusion 360 for 3d printing by Rodrigo S. A

Author:Rodrigo S. A. [S. A., Rodrigo]
Language: eng
Format: azw3
Publisher: Steadman Thompson
Published: 2020-12-08T16:00:00+00:00


Next step is to shell the body, so go to Bodies, disable the cover. Go to Modify/Shell and select the front face of the body, select 2mm

In the image below you can see 2 bodies. I’ve moved the cover using Move command so you can give a better look to the assembly of the 2 parts.

So, what else is missing now? We still need to make component holes in the cover and we know how to do that. But we will also make holes for screws now and we will have to create support for the screws. We will also make a back hole for the power cable and some little tweaks.



Download

Electronic enclosures for 3d printing: Tutorials, tricks and tools to make your own electronic enclosures with Fusion 360 for 3d printing by Rodrigo S. A.azw3


Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.