Woodworking with Resin by Clayton Meyers

Author:Clayton Meyers
Language: eng
Format: epub
Publisher: Fox Chapel Publishing

3 Drill the pilot holes. Once the adhesive has dried, drill ⅛″ (3.2mm) diameter pilot holes in all shaded areas of the pattern. The shaded areas are where the resin will pour once cut free.

4 Cut out the areas that will hold resin. Now that the pilot holes are drilled, use the scroll saw with a #5 standard blade to remove the shaded areas on the pattern. For one of the larger orange slices, you will need to remove the slice from the blank first, then cut out the shaded area.

5 Tape the blank and create the mold. Use clear packaging tape to reattach the one loose orange slice. Also use the packaging tape to seal off the bottom and sides of the blank. This will create the “mold” for where the resin will be poured.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.