Wood Magazine 158 by Bill Krier

Author:Bill Krier
Language: eng
Format: epub
Tags: Wood, Home and hobby woodworker
Publisher: Meredith Corporation
Published: 2004-03-25T05:00:00+00:00

Using stopblocks to precisely position the pipe supports (M) and pipe clamp (N), bore 3/i" holes through each part at the marked centerpoints on the pattern.

8 From a 60"-long piece of W O.D. aluminum pipe, hacksaw one 5 l /:"-long piece and two 25 ; /4 M -long pieces. Slide the two long pipes through the holes in the two pipe supports (M). Align one support flush with the ends of the pipes. Then drill mounting holes through the support and pipes, where shown on Drawings 2 and 4, and drive the screws. Do not fasten the other support to the pipes.

9 Capture the 5l4"-loog pipe in the Ya" holes in the sides of the handle supports (O). Then position this assembly on the ends of the long pipes, where shown. Drill countersunk 3 /is" holes through the supports and pipes, where shown on Drawing 2, and secure with machine screws and stop nuts. For safety, trim the ends of the screws flush with the nuts using a hacksaw, and smooth with a file.

Head for the finish

1 Remove the top (K), doors (L), and all of the hardware. Sand any areas that need it with 220-grit sandpaper, and remove the dust. Apply a clear finish, if

Double-faced tape applied to hinge leaf

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.