The Complete Guide to Plumbing by Editors of Creative Publishing

Author:Editors of Creative Publishing
Language: eng
Format: epub
Publisher: Creative Publishing international
Published: 2008-08-22T16:00:00+00:00

Cut and test-fit a new cleanout and long sweep TY combo assembly, dry-fitting it to the drain stack and the horizontal drain line to the street. Make any needed adjustments and then solvent-glue the fittings and new pipe into a single assembly.

Clean the outside of the old pipes thoroughly and apply primer. Also apply primer and solvent glue to the female surfaces of the union fittings in the assembly. Slide the fitting assembly over the primed ends of the drain stack and the drain line at the same time. This requires a little bit of play in one or both of the lines so you can manipulate the new assembly. If your existing pipes will not move at all, you’ll need to use a banded coupling on the drain stack to seal the gap.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.