Stick and String: A Beginner's Guide to Building Laminated Fiberglass Longbows by James E. Wadsworth

Stick and String: A Beginner's Guide to Building Laminated Fiberglass Longbows by James E. Wadsworth

Author:James E. Wadsworth
Language: eng
Format: mobi
Published: 2017-02-02T23:00:00+00:00


Tape the limbs in place with the filament tape about half way down and then again at the very end. This helps keep everything in place. So make sure the tape is tight and that no plastic gets in between laminations. I pinch the plastic and pull it away from the bow all the way down each side of the limbs just to make sure.

CUT off the extra belly lamination material!!! You need to do this because it will now be sticking out about two to four inches from the form and will interfere with the hose once it is aired up. I use a Dremel with a cutter on it to cut it flush with the other laminations. Be careful of the plastic. It will grab the Dremel tool and rip it out of your hands.



Download



Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.