Professor Parabellum - Break-Barrel Shotgun Plans by Practical Scrap Metal Small Arms Volume 14. 14-Professor Parabellum

Author:Practical Scrap Metal Small Arms Volume 14. 14-Professor Parabellum
Format: epub

Insert a piece of 1/4” (6mm) plate between side plates to ensure correct inner dimensions remain while welding frame components together. File down top of trigger guard to 1/4” to allow insertion between plates. Weld 2 inches Print on 8.5x11 US letter paper

Barrel 1” outside diameter, 3/4” inner diameter seamless steel tube, 20“ long. Can be sleeved with a section of 1” inner diameter steel tube for maximum thickness. Bevel inner wall using a dremel to accommodate rim File shallow extraction cut into lower wall Rear # 130mm Weld or braze an M6 nut to bottom of barrel Drill a 2.5mm hole and tap for an M3 button head bolt to serve as a sight bead is, Front

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.