Professor Parabellum - 9mm Bullet Hose by Practical Scrap Metal Small Arms Volume 8. 8-Professor Parabellum

Author:Practical Scrap Metal Small Arms Volume 8. 8-Professor Parabellum
Format: epub

9mm Bullet Hose - Practical Scrap Metal Small Arms VOL.8 Bolt carrier The carrier section of the bolt is made from a 5.5” long section of 35mm x 1.5mm mild steel round tube. The matching off-cut produced during it’s modification will be used to create the sear. Top 5.5” 40mm e Dia: 35mm Front 1” Mark a 28mm wide strip and remove along entire length of tube. The off-cut will be used for creation of the sear. SZ If obtainable, use 35mm tubing with a 5mm thick wall instead 28mm and skip additional modifications below Two 85mm lengths of mild steel bar stock are required to make the sear contact points on the bolt. 10mm | Mild steel bar stock X2 85mm 2 inches Bolt carrier : 35mm x 1.5mm round mild steel tube Print on 8.5x11 US letter paper Sear contact bars : 10mm mild steel bar stock

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.