Infinity USB Phoenix User's Manual by WB Electronics

Author:WB Electronics
Language: eng
Format: epub
Tags: Manual, WB Electronics
Published: 2003-03-24T16:00:00+00:00

Visit www.infinityusb.com for further programming instructions.

Phoenix mode

To use the Phoenix mode of Infinity USB, a serial cable must be attached from the programmer to the PC. All 3rd party software will use this COM-port for communication.

Phoenix mode is entered by pressing the Phoenix button on the main window. You'll be prompted to choose between a frequency of 3.58, 3.68 or 6.00Mhz, and either Phoenix or Smartmouse mode.

L^i^l-

Pressing [enable] will make the red LED light, to show the programmer is in Phoenix mode. At the same time, the program will be minimized to tray.

10

Phoenix mode

All software supporting a COM-port can now be used for communicating with the smartcard.

If the Infinity USB Phoenix hardware is mostly used in Phoenix mode (or if Phoenix mode is needed before the software is loaded for instance for password control), it's possible to setup the Infinity USB Phoenix this way.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.