Cleaning in life by Guo

Author:Guo [Guo]
Language: eng
Format: epub
Published: 2019-04-25T22:00:00+00:00

Air conditioning ( 2 )

In order to avoid problems during the peak period of air conditioning, it is necessary to test the air conditioner before using the air conditioner. The main steps are as follows:

1. First observe the obstacles in the air conditioner. If so, clean up in time.

2. Open the indoor casing and observe the internal filter for dust and odor. If the dust is too much or the odor is serious, clean the filter.

3. After installing the filter, plug in the power for 3 to 5 minutes, set the remote control to the cooling mode, set the temperature to the lowest condition, start the operation, and check the hidden danger.

4. After the air conditioner is running, set the wind speed switch of the remote control to run in different gear positions to observe whether the internal machine has abnormal noise. Run the machine for 15minutes or so to observe whether the external fan is running normally, and whether the external machine has abnormal noise. Run the machine for about 30 minutes to observe whether there is any cold wind in the indoor unit, and whether there is condensate out of the outdoor unit outlet pipe, and whether the running water is unblocked.

⒈ split air-conditioning

Disconnect the air conditioner power supply, open the cover, remove the filter and wash away the dust, and spray the special air conditioner cleaning agent evenly on the air inlet surface of the air conditioner evaporator. If there is too much dirt, wipe it off with a damp cloth or rinse with a small amount of water. . After cleaning, install the filter, close the panel and let it stand for 10 minutes, then turn on the air conditioner and adjust the air volume to the maximum, keep the air conditioner turned on for 20 minutes.

2. Cabinet air conditioner

Remove the panel of the cabinet, find the evaporator of the air conditioner, spray the special air conditioner cleaning agent evenly on the air conditioner evaporator, then cover the panel, let it stand for about 10 minutes, turn on the air conditioner and adjust the air volume and cooling capacity to the maximum. Keep the air conditioner turned on for 20 minutes.

3. For a large amount of dust and bacteria hidden in the interior of the condenser and evaporator, etc., it is generally unhelpful. Professionals must use a variety of special air conditioner cleaners to quickly remove various dust and bacteria inside the air conditioner. .

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.