Black & Decker The Complete Guide to Plumbing by Editors of Cool Springs Press

Author:Editors of Cool Springs Press
Language: eng
Format: epub, pdf
Publisher: Cool Springs Press
Published: 2019-01-19T16:00:00+00:00

Beginning with the panel without plumbing cutouts, spread a continuous 1/4" bead of panel adhesive along the four edges of the back of the wall panel, no closer than 2" to the edges. Leave gaps at the ends so air can escape when you press the panels against the wall. Also apply an S-shaped continuous bead to the center of the panel. Position the panel against the wall so the bottom rests firmly against the shower-pan curb and side edges are against the wall channel and the corner of the room. Press the panel against the wall firmly, and smooth it with even hand pressure until the panel is perfectly flat. Repeat with the wall that has plumbing cutouts, making sure to apply a bead of panel adhesive around the cutouts. Finally, apply panel adhesive to the back of the corner panel and press it into place. (Some shower models may have a connecting rod that joins the corner panel to the shower-pan unit.) If any excess adhesive has squeezed out around the edges of the panel, clean it away with a rag moistened with mineral spirits.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.