Learning OpenStack Networking (Neutron) Second Edition by Second Edition

Author:Second Edition [eBook]
Language: eng
Format: mobi, epub
Publisher: Packt Publishing
Published: 0101-01-01T00:00:00+00:00

Installing and configuring the Neutron L3 agent

To install the Neutron L3 agent, run the following command on the controller node:

# apt-get install neutron-l3-agent

Neutron stores the L3 agent configuration in the /etc/neutron/l3_agent.ini file. The most common configuration options will be covered in the next section.

Defining an interface driver

The Neutron L3 agent must be configured to use an interface driver that corresponds to the chosen mechanism driver. In a reference implementation, that can be either the LinuxBridge or Open vSwitch drivers.

On the controller node, update the Neutron L3 agent configuration file at /etc/neutron/l3_agent.ini and specify one of the following interface drivers.

For LinuxBridge, use the following settings:

[DEFAULT]

...

interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver

For Open vSwitch, run the following settings:

[DEFAULT]

...

interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.