515628420 by Unknown

Author:Unknown
Language: eng
Format: epub

For this task, therefore, a fence was fixed onto the angle plate’s face to position the part accurately at the required angle (see Photograph and with that in position a clamp was added to secure the part to be machined (see Photograph Actually a second clamp would have been worth adding for additional security.

With that done, the assembly was transferred to the milling machine and the angle and notch made (see Photograph If more than one part were to be made, then adding an end stop would also have been a good idea, as subsequent parts could then be added and removed with ease and without the need to position the workpiece or to measure the work being undertaken. While I emphasize the benefit in the case of batch production, I realize that the home workshop will rarely make largish quantities. Even so, quantities of two, three or four are not uncommon, and even at these quantities the approach is very worthwhile. Due to the length of the part being machined, this would have been very difficult to carry out with the part in the vise, though some may have sandwiched it between two thicker pieces of steel. Setting the angle would still be less than easy.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.