Gun Digest Smith & Wesson M&P Assembly/Disassembly Instructions

Author:J.B. Wood
Language: eng
Format: epub
ISBN: 978-1-4402-3175-9
Publisher: F+W Media
Published: 2011-05-04T16:00:00+00:00

13. Drifting out the vertical pin will allow removal of the extractor and its coil spring.

14. With a proper roll-pin drift punch, drive out the cross-pin at the upper rear of the grip frame.

15. After the pin is removed, gently pry the rear sub-frame upward. As it clears the frame, the ejector can be detached from the left side.

16. Pushing out this cross-pin will allow removal of the sear and its plunger and spring. CAUTION: The plunger and spring are very small and easily lost.

17. Pushing out the cross-pin at lower front will free the magazine safety and the sear deactivation lever, and the attendant torsion spring. CAUTION: The torsion spring will be released, so control it. The key-lock in this unit should not be disturbed.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.