Woodworking for beginners: 50 Projects and Practical Techniques you should apply by Paul Berger & Paul Berger

Author:Paul Berger & Paul Berger [Berger, Paul]
Language: eng
Format: epub
Published: 2020-07-25T00:00:00+00:00

Procedure:

A piece of hardwood can be glued to the edge of a shelf to strengthen it.

To rout the rabbet in the edge piece, install a ¾ inch straight bit in your router and mount the tool in a table.

Set the fence for a width of cut equal to the thickness of the shelf.

To secure the work piece throughout the cut, screw a feather board to a shim and clamp the assembly to the table.

The shim will raise the feather board to apply pressure to the middle of the work piece.

Also install feather boards to the fence on both sides of the bit.

For the sake of clarity, the feather board on the out feed side of the fence has been eliminated in the illustration.

Do not attempt to rout the rabbet in one pass.

Instead, make a series of passes, increasing the depth of cut each time.

Repeat until the shelf fits flush in the rabbet.

You can round or shape the edge piece to your liking.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.