Woodcraft: A Guide to Camping and Survival by E H. Kreps

Author:E H. Kreps [Kreps, E H.]
Language: eng
Format: epub
ISBN: 9781620874813
Amazon: 1620874814
Publisher: Skyhorse Publishing
Published: 2013-01-02T06:00:00+00:00

THE WOODMAN'S PERFECT AX

POSITION OF AX WHEN CUTTING BRUSH

CUTTING THE FIRST NOTCH

In the shaping of an ax blade there are some rules that must be remembered and adhered to if the maximum of efficiency is desired. These same rules must be known to the user of the tool, for in the grinding, a bad chopping ax may often be made better, while bad grinding makes it worse. One of these rules, and the most important, is to have the blade or bit thinnest on the "inside corner," which is the end of the blade nearest to the user. The hasty conclusion would be that if this corner were thinnest, the opposite side of the blade should be thickest. This is wrong. The thickest part of the blade should be two-thirds of the way across from the inside corner, the place marked X in the drawing of what I call "the woodsman's perfect ax." A blade so shaped will have the maximum chopping power, will sink easily into the tree, will burst the chip well, and will not bind in the wood.

I think it best that the ax head be made of wrought iron, split, and a welded-in steel bit. This gives the maximum strength. The butt of the ax might also be of steel, and would be more convenient for the trapper if it had a claw for drawing trap staples. If the eye of the ax is not tempered in the least the entire head may be made of steel and will be almost, if not fully, as strong, while the making is simplified.

You may wonder why a trapper need concern himself with the making of the ax if he can buy it ready made, but if there is a trapper's perfect ax made, I do not know of it. I know, however, that many readers of this article have in their locality a blacksmith who is fully capable of making such an ax to order.

For the northern forest and the western mountain district the ax that I would recommend would weigh only about two pounds, handle not included in the weight. Some of you may think this entirely too light, but the northern Indians use axes of only one and a half pounds, and find them heavy enough for practical purposes, while light to carry on the trail. To make a light ax effective, however, it must have a long handle. An ax like this should have a handle of from thirty to thirty-four inches over all, and with such a tool you will be surprised to see what heavy work can be done.

As said before, I do not know of a better wood for ax handles than hickory. It is very strong and springy and it always stays smooth; as cold to the touch as the ax head itself. It is difficult to get ax handle wood when we reach the upper part of the northern tier of states or Canada, for hickory is not found there.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.