Build Your Own Home Office Furniture by Danny Proulx

Author:Danny Proulx
Language: eng
Format: epub, pdf
Tags: epub, ebook
Publisher: F+W Media
Published: 2001-03-14T16:00:00+00:00

[25] Use glue and 2″ screws in counterbored holes to secure the top board (MM) to the sides and back. Fill the holes with wood plugs. The board edges do not have to be covered because a moulding strip will hide them.

[26] Install a moulding strip on the front and two side top edges. Choose any moulding that's suitable as long as it's at least ¾″ high. Miter the corners at 45° and secure the strip with glue and finishing nails.

[27] The divider and compartment section is built as a unit and installed in the hutch. If you wish to use the same design as shown here, cut all the parts to size as detailed in the cutting list. Apply wood veneer edge tape to all exposed edges before joining the boards. The section is assembled using simple butt joints with glue and 2″ screws. Remember to counterbore any screw head that will be visible so it can be hidden with awood plug.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.